Metric Tutorials - Autodesk

21 Click View menu ➤ Zoom ➤ Zoom in Region, and draw a zoom box around the curved wall.
The dimension is snapped to the wall centerline, the default dimension option.
22 On the Design Bar, click Modify, select the dimension line of the radial dimension, and press
DELETE.
23 On the Design Bar, click Dimension.
24 On the Options Bar, click , and select Wall faces for Prefer.
25 Dimension the curved wall again:
■ Move your cursor over the inside face of the wall until it highlights.
■ Select the inside face of the wall, and place the dimension as shown.
26 Adjust the zoom settings so that you can add a dimension to the upper-left portion of the North
Building.
Create an angular dimension
27 On the Options Bar, click (Create Angular Dimensions), and verify that Wall faces is selected
for Prefer.
28 Dimension the angled wall at the top left of the North Building:
■ Select the inside face of the angled wall below the opening, and then select the inside face
of the vertical wall below it.
■ Move your cursor to the right to size the dimension arc, as shown, and click to place the
dimension.
372 | Chapter 11 Annotating and Dimensioning