Metric Tutorials - Autodesk

12 Under Colors, click the value for Selection Color.
13 In the Color dialog, select yellow, and click OK.
NOTE You can also specify the Alert Color. When an error occurs, the elements causing the error
display using this color.
14 Click the General tab.
15 Under Notifications, specify the following options:
■ For Save Reminder interval, select One hour.
■ For Save to Central Reminder Interval, select One hour.
■ For Tooltip Assistance, select None.
16 Click OK.
Setting Options
17 On the Modelling tab of the Design Bar, click Structural Wall.
18 Sketch a simple straight horizontal wall in the center of the drawing area.
19 On the Design Bar, click Modify, and select the wall.
Notice the selected wall is yellow rather than the default red.
20 On the Design Bar, click Modify.
21 Place the cursor over the wall but do not select it.
Notice that a tooltip is not displayed.
22 Place the cursor over any of the icons on the toolbars.
Notice that a tooltip is displayed even though you set Tooltip Assistance to None. This setting
controls only the tooltips that display within the drawing area.
23 Click File menu ➤ Close.
24 When prompted to save, click No.
25 Click File menu ➤ Open.
26 In the left pane of the Open dialog, click Training Files, and open Metric\m_RST_Settings.rvt.
Notice that the system settings apply to this project.
74 | Chapter 3 Modifying Project and System Settings