Metric Tutorials - Autodesk

Notice the roof deck is now resting on the roof supports.
39 In the Project Browser, under Structural Plans, double-click Roof.
40 On the Basics tab of the Design Bar, click Slab.
41 On the Design Bar, click Floor Properties.
42 In the Element Properties dialog:
■ For type, select 75mm Metal Roof Deck - Tapered Insul
■ Under Constraints, for Height Offset From Level, enter 875 mm.
■ Click OK.
43 On the Design Bar, click Pick Supports.
44 Select specific supports.
45 On the Toolbar, click .
46 With the Trim/Extend tool selected, click each line to complete the outline of the shape-modified
slab.
178 | Chapter 5 Creating a Structural Model