Metric Tutorials - Autodesk

Creating a Deck Span Transition Detail
Training File
■ Click File menu ➤ Open.
■ In the left pane of the Open dialog, click Training Files, and open Metric\m_RST_Deck_Span_Detail.rvt.
Create the drafting view
1 On the View tab of the Design Bar, click Drafting View.
2 In the New Drafting dialog, do the following:
■ Under Name, enter Typical Detail - Deck Span Transition.
■ Under Scale, select 1:10.
■ Click OK.
3 In the Project Browser, expand Drafting Views, and double-click Typical Detail - Deck Span
Transition.
Load detail components
4 On the Drafting tab of the Design Bar, select Detail Component.
5 In the Type Selector, select UB-Universal Beam- Section: 406x178x54UB.
6 Click the drawing area to place the component.
7 On the Design bar, click Modify.
8 On the Drafting tab of the Design Bar, select Detail Component.
9 In the Type Selector, select M_K-Series Bar Joist - Side: 14K3.
10 Position the joist on the right side of the beam.
Align the bottom of the joist seat with the top of the beam as shown.
11 On the Design bar, click Modify.
Creating a Deck Span Transition Detail | 311