Metric Tutorials - Autodesk

38 On the File menu, click Save.
NOTE If you intend to complete the next exercise of this tutorial, you need this project file open and
in this view.
In this exercise, you linked two separate Autodesk Revit Structure 2009 models into a site model. After linking
the files, you rotated and moved the building models to fit them into their designated positions within the
site development.
In the next exercise, you modify the elevation of the townhouses.
Repositioning Linked Building Models
In this exercise, you reposition the townhouses in respect to their elevation. When you originally linked
the files, they were placed too low within the site topography. In this exercise, you modify their vertical
position so that the townhouses sit correctly on the site.
NOTE This exercise requires the completion of the previous exercise in this tutorial and the resulting project files.
If you have not completed the previous exercise, do so before continuing.
Modify the vertical position of the townhouses
1 On the View toolbar, click (SteeringWheels).
2 On the SteeringWheels, click and hold Orbit, and then spin the model until it resembles the
following illustration.
NOTE If this is the first time you are using the SteeringWheels, click Try Me for the Full Nav Large
Wheel.
Repositioning Linked Building Models | 623