Metric Tutorials - Autodesk

5 On the Basics tab of the Design Bar, click Slab.
6 On the Design Bar, click Floor Properties.
7 In the Element Properties dialog, for Type, select 75mm Metal Roof Deck - Tapered Insulation,
and click Edit/New.
8 In the Type Properties dialog, click Duplicate.
9 In the Name dialog, enter 75 mm Metal Roof Deck - 100 mm Rigid Insulation, and click OK.
10 In the Type Properties dialog, under Construction, for Structure, click Edit.
11 In the Edit Assembly dialog, for Layer 2, clear Variable, and click OK twice.
12 In the Element Properties dialog, under Constraints, for Height Offset From Level, enter 1075
mm, and click OK.
Trace the outline of the roof
13 On the View toolbar, click , and draw a zoom box around the upper-left corner of the
structure.
14 On the Design Bar, click Lines.
15 On the Options Bar, click , and enter 150 mm for Offset.
16 Click the beam on the upper-left corner of the structure so the offset is placed on the outside
of the beam.
17 Enter ZF.
18 Using the same method, click additional lines that outline the roof.
Adding a Shape-Modified Slab | 173