Metric Tutorials - Autodesk

24 In the Schedule Properties dialog, do the following:
■ Under Fields, select REBAR.
■ Under Heading, enter Bottom Bars.
■ Click OK.
25 In the Element Properties dialog, click OK.
The Rebar field is renamed.
Add new rebar parameter
278 | Chapter 8 Scheduling
26 Right-click the open area next to the schedule, and click View Properties.
27 In the Element Properties dialog, under Fields, click Edit for Value.
28 In the Schedule Properties dialog, click Add Parameter.
29 In the Parameter Properties dialog, do the following:
■ Under Parameter Data, enter Top Bars for Name.
■ Under Type of Parameter, select Text.
■ Click OK.
This parameter provides text information that is added to all beams within the model. Rebar
will not be added to the model with the data entered in this dialog.
30 Under Scheduled fields, order the fields as shown by selecting them and clicking Move Up or
Move Down.
31 In the Schedule Properties dialog, click OK.
32 In the Element Properties dialog, click OK.
The new rebar field is added.