Metric Tutorials - Autodesk

Setup views
4 In the Project Browser, click Views (all) ➤ 3D Views ➤ 3D.
For the remainder of this exercise, this view is referred to as the 3D view.
5 In the Project Browser, click Sections (Building Section) ➤ Section 3.
For the remainder of this exercise, this view is referred to as the section view.
6 Click Window menu ➤ Tile.
The section view and the 3D views now display in separate windows in the drawing area.
7 Close any additional windows that may have been opened accidentally.
View the rebar set in 3D
8 Click inside the section view and do the following:
■ On the Toolbar click .
■ Draw a zoom box around the entire section view.
9 Click inside the 3D view, and do the following:
■ On the Toolbar click .
■ Draw a zoom box around the concrete beam.
Creating and Viewing a Rebar Set | 67