Metric Tutorials - Autodesk

25 Click File menu ➤ Close.
To save changes, click File menu ➤ Save As, and save the exercise file with a unique name, or
close the exercise file without saving changes. The next exercise uses a new training file.
26 Proceed to the next exercise, Path Reinforcement in a Slab on page 342.
Path Reinforcement in a Slab
In this exercise, you model path reinforcement in a concrete slab.
Training File
■ Click File menu ➤ Open.
■ In the left pane of the Open dialog, click Training Files, and openMetric\m_RST_Path_Reinf.rvt.
Sketch the path reinforcement
1 In the Project Browser, under Structural Plans, double-click Level 3.
2 On the Toolbar, click , and draw a zoom box around the slab opening on the north side
of the structure as shown.
3 On the Modelling tab of the Design Bar, click Rebar ➤ Sketch Path Reinforcement.
4 Select the slab opening.
You are now in sketch mode.
342 | Chapter 10 Concrete Reinforcement Modelling