Software Input/Output Guide X11 Administration ... - paulmick.com

LD 10
Alphabetical list of prompts Page 89 of 1050
Prompt Response Comment Pack/Rel
EHT x...x External Hunt DN
This is the DN to which external busy calls Hunt when
Class of Service is Call Forward by Call Type allowed
(CLS = CFTA). Must also have CLS = HTA.
Listed DNs, Departmental Listed DNs and prime DNs are
accepted as valid input. A Group Hunt pilot DN can be
entered with up to:
• 4 digits without DNXP package 150
• 7 digits with DNXP package 150
• 13 digits for Network Call Redirection
FAXS x...x Facsimile server and command sequence
The command sequence includes the following:
• Wx = waiting time of 0 to 9 seconds
• Cxxx = control command digits
• Oxxxx = originating or designated fax DN
• D = the called fax DN
For HiMail server, if the designated fax DN is 1234:
FTR FAXS W6 O1234 C#10* D C## W4, or
FTR FAXS W6 O1234 C#20* D C## W4
For Phi-Net server, if the designated fax DN is 1234:
FTR FAXS W4 C30 O1234 C*0 D C#
The facsimile server TNs must have Digitone (DTN) Class
of Service and cannot have FNA, CWA, or FBA Class of
Service, or FTR CFW feature.
Use the HUNT feature to define the DN of the next port on
the facsimile server.
basic-10
faxs-18
X11 Administration