Software Input/Output Guide X11 Administration ... - paulmick.com

LD 15
Alphabetical list of prompts Page 269 of 1050
Prompt Response Comment Pack/Rel
AWU (NO) YES Enable Automatic Wake-Up awu-10
X All AWU related data is removed from CDB.
Prompted with Automatic Wake-Up (AWU) package
102.
AWU_DATA (NO) YES Change Automatic Wake Up options basic-21
AXID (NO) YES Auxiliary Identification output in CDR record cdr-1
Auxiliary Identification provides the TN when the call
involves a multiple appearance DN.
BCAP (NO) YES Bearer Capability in CDR cdr-24
BDI (YES) NO Buffer Data Interface for CDR dba-24
BOTO 2-(14)-60 Busy tone/Overflow tone Timeout basic-10
Odd entries are rounded down to a valid multiple of
two seconds.
BPSS (NO) YES Block Pretranslation on System Speed Call lists when
dial accessed.
pxlt- 23
ssc- 23
BSFE (NO) YES Boss Secretary Filtering Enhancement ffcsf-24
BSGC 0-(65535) Business Sub Group Consult-only. Where:
• 0 = no indication
• 1 - 65535 = Subgroup identifier
This value is sent as the Multi-location Business Group
Subgroup (MBGS) identifier or tenant number when an
existing call has more than two different MBGSs. In this
case a consultation connection will be allowed, but
completion of a call modification, conference or transfer,
will be disallowed.
If BSGC = 0 then Call Transfer and Call Modifications
may be restricted under certain circumstances. Ensure
BSGC is not 0 if Call Transfer and Call Modifications to
be allowed.
CAC0 0-(6)-10
0-(3)-9
MFC value corresponding to CIS 0.
Reserved.
CIS value corresponding to MFC DGT 0.
tens-16
cist-24
X11 Administration