Software Input/Output Guide X11 Administration ... - paulmick.com

LD 17
Alphabetical list of prompts Page 473 of 1050
Prompt Response Comment Pack/Rel
INTL 1-12 Interval iap3p-12
Time interval for checking Meridian Link for overload
in five second increments
This is the interval for counting the number of
messages on a Meridian Link. See prompt MCNT.
IOTB (NO) YES Input/Output Terminal Buffers basic-1
Change input/output terminals or devices.
Prompted in Release 17 and earlier.
ISDN (NO) YES Integrated Services Digital Network
Prompted with 1.5 Mbit Primary Rate Access (PRA)
package 146. Prompted in Release 17 and earlier.
pri-12
ISDN_MCNT qsig-22
60-(300)-350 Layer 3 call control message count per 5 second
time interval.
ISLM 1-382 Integrated Services Signaling Link Maximum. isl-12
Maximum number of ISL trunks controlled by the
D-channel. There is no default value.
JDMI 0-159 Japan Digital Multiplexer Interface loop number jdtm-14
Precede with X to remove. Not for Option 11.
K 1-(7)-32 Maximum number of outstanding frames
This value should be the same for the Meridian 1
(near-end) and the host processor (far-end). Where:
• 7 = recommended value for AUX applications
• 2 = recommended value for CCITT
cls-7
LANGUAGE sta-19
ENGLISH Language supported on STA
LAPD (NO) YES Link Access Protocol for D-channel pri-12
Change LAPD parameters.
X11 Administration