Software Input/Output Guide X11 Administration ... - paulmick.com

LD 02
Page 48 of 1050 How to use traffic commands
Set system ID
Old schedule
553-3001-311 Standard 6.00 June 1999
start time: April 25 at 12 noon
end time: July 16 at 9 P.M.
frequency: hourly on the half-hour (SO = 2)
days of the week: Monday to Friday
New schedule
start time: October 1 at 12 midnight
end time: December 1 at 11 P.M.
frequency: hourly on the hour (SO = 1)
days of the week: Sunday and Saturday
Note 1: In order to obtain traffic reports at the scheduled intervals, the
output device must have prompt USER = TRF in (LD 17). If TRF is not
defined for any device, reports are still generated to allow the printing of
the last reports.
Note 2: Half hour start and end times are not possible.
Each Meridian 1 system has a unique system ID number (SID) selected from
0000 to 9999. The 4-digit ID number can be printed or set by the following
commands.
To print the current SID: TSID sid
To change the SID: SSID sid -- SID