Software Input/Output Guide X11 Administration ... - paulmick.com

LD 11
Page 174 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
c u Option 11TN format: c u = card, unit
• c = 1-20
• u = 0-31
Release 20 and later
• c = 1-30
• u = 0-31
Release 24 and later
• c = 1-50
• u = 0-31
553-3001-311 Standard 6.00 June 1999
basic-16
TOTN To Terminal Number basic-20
l s c u General TN format: l s c u = loop, shelf, card, unit
c u Option 11 TN format
This prompt appears when REQ = MOV and is not
prompted for Option 11 model sets.
TOV Timeout Value for the Data port, for M2006, M2008,
M2216 and M2616 data port only
(0) No Timeout
1 15 minutes
2 30 minutes
3 60 minutes
TRAN Port transmission type for the data port on M2006,
M2008, M2216, M2616 telephones
(ASYN) Asynchronous data transmission
SYN Synchronous data transmission
Asynchronous data modules cannot be set as
synchronous. An MMPO with DTAO, MPDA, or MMPO
supports SYN.
TYPE: Type of data block
In Release 19, a colon following a prompt indicates
Enhanced Processing. Enhanced Processing allows a
user to either view a list of possible responses or input
an abbreviated response.
Note: For Release 19, LD 11 is linked with LDs 10, 20 and 32. You may enter
any of the response options listed for the TYPE prompt in LDs 10 and 20 or any
of the commands listed in LD 32. See “Changes for Release 19” on page 106
for further information.
mcu/arie-19
mcu/arie-19
basic-1