Software Input/Output Guide X11 Administration ... - paulmick.com

LD 15
Alphabetical list of prompts Page 325 of 1050
Prompt Response Comment Pack/Rel
SDFL 384-(1024)-2048 basic-21
Signal Destination Flash Timing
S_ENTRY (1)-2000 Entry of ANI table applying to a set
SIZE 0-(256)-400
0
Specify maximum number of CLID entries needed. isdn-22
SPRE xxxx Special Prefix number (1-4 digits) basic-1
Precede with X to remove. The prefix must not conflict
with the numbering plan.
SPVC Supervisory console bacd-8
(0) No Supervisor console
1-63 Attendant number of Supervisory console
Prompted with Supervisory Attendant Console (SPVC)
package 93.
SPWD xxxx Secure Data Password
Precede with X to remove. This password is entered
when using LD 88 for authorization codes and LD 24
for Direct Inward System Access (DISA) block.
disa-1
SRAN 0-511 Second RAN number for second PCR threshold supp-16
X To disable the RAN
SRCD 0000-9999 Set Relocation Security Code
Precede with X to remove. Release 19 and later has a
default code of 0000, there is no default with Release 18
and earlier. Prompted with Set Relocation (SR)
package 53.
SRRT 0-511 Second RAN Route for ROA. roa-2
X Enter X to remove.
SRT 2-(40)-2044 Second RAN Time, in seconds before second RAN
given
SRVR_DN x...x Mobility User Database (MUD) Server DN.
This entry can be up to 7 digits. SRVR_DN is prompted
if MUD_SRVR = NO.
sr-1
ran-1
mmsn-22
X11 Administration