Software Input/Output Guide X11 Administration ... - paulmick.com

LD 11
Page 160 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
xx PVR yyyy (ccc or D) zz..z basic-20
Private Line Ringing key
Where:
• yyyy = DN
• ccc = CLID entry of (0)-N, where N = the value
entered at the SIZE prompt in LD 15 minus 1.
• D = the character D may be entered to search a
CLID entry from key 0 and up to find a DN key.
The CLID associated with the found DN key will
then be used.
• zz..z = additional information required for the key
aaa. For Release 24 and later.
The DN can be up to 4 digits, up to 7 digits with Directory
Number Expansion (DNXP) package 150. Must have
Private Line Directory Number (PRDN) defined in LD 14.
On the M3901, M3902, key 0 is reserved for PRV. basic-24
xx RAG ACD Ring Agent key (must have CLS =SPV) acdb-1
xx RCK y z Ringing Change Key
Where:
• y = first key/lamp strip controlled by key = (0)-6
• z = second key/lamp strip controlled by
key = 0-(1)-6.
Only one ringing change key per set is permitted.
Requires International Supplementary Features (SUPP)
package 131 and Ringing Change Key (RCK) package
193.
xx RDL yy Redial stored number key
Where: yy = number of digits = 4, 8, 12, (16), 20, 23.
Numbers between 5 and 22 are rounded up to the next
valid number.
553-3001-311 Standard 6.00 June 1999
rck-15
snr-3