Software Input/Output Guide X11 Administration ... - paulmick.com

LD 17
Page 502 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
SSUP (NO) YES Senior Supervisor acdc-1
Device assigned used by senior supervisor/load
manager. Cannot be YES if prompt APRT is YES.
STOP (1)-1X5-2 Number of stop bits
To enter 1.5, use 1X5. (Options 51C, 61C, 81 and
81C do not support 1.5). Prompted for asynchronous
ESDI ports.
For Option 11C, STOP is not prompted for
CARD 0 PORT 0 or when TTY_TYPE = PTY.
553-3001-311 Standard 6.00 June 1999
cls-19
SUPPRESS alarm-19
0-(5)-127 Alarm occurrence threshold (prior to suppressing)
This determines the number of times an alarm may
occur before it is no longer output. Entering 0
indicates that all alarm occurrences are output
(no suppression)
SYNC (NO) Asynchronous mode of operation for ESDI port csl-7
YES Synchronous mode of operation for ESDI port
SYNM Synchronization Mode ida-16
(0) No synchronization
1 Main input from Digital Trunk Signaling Link or DTSL
2 Main input and standby input from DTSL
3 Main input from external clock
4 Main input from DTSL; standby input from external
clock
5 Main input from external clock; standby input from
DTSL
SYNM is prompted with Integrated Digital Access
(IDA) package 122.
T1 2-(4)-20 Retransmission Timer cls-7
Range in units of 0.5 seconds, (4) = two seconds
T2 0-(10)-255 Maximum Time allowed without a frame being
exchanged.
cls-7
T200 2-(3)-40 Retransmission Timer pri-12
Entry is in units of 0.5 seconds.