Software Input/Output Guide X11 Administration ... - paulmick.com

LD 16
Page 400 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
RDNL 0-(4)-7 Remote DN length used to extract the necessary
number of DN digits from the MCDN or QSIG CLID
or from the DPNSS OLI.
Prompted if Commonwealth of Independent States -
Three Wire Analog Trunk (CIST) package 221 is
equipped for QSIG, MCDN, or DPNSS TIE routes.
553-3001-311 Standard 6.00 June 1999
cist-21
REF n...n Reference loop around DN, range is 2 to 10 digits basic-1
REP 1-15 Repetitions of recorded announcements ran-1
REQ Request basic-1
CHG Change existing data block
END Exit overlay program
OUT Remove data block
LCHG Print date and time that a trunk data block was last
changed. The change can be the result of a NEW, OUT,
or CHG command.
NEW Add new data block to the system
RGFL ic dc Ring Failure threshold. Where:
• ic = increment count = 1-(2)-31
• dc = decrement count = 1-(2)-31
RGFL specifies the percentage threshold for trunks
which fail to produce the expected ringing and ground
changes. See prompt ILLR for a description of ic and dc
values.
RGFL is not prompted for AID, CAM, CSA, RLM, RLR
and TIE trunks The default for RAN and MUS trunks is
12 6.
basic-1
RLSM (0)-15 Release Mechanism.
Refer to Table 4, “Release Mechanism Options,” on
page 349. RLSM is prompted if DTRK = YES and
DGTP = DTI2.
pedm-18