Software Input/Output Guide X11 Administration ... - paulmick.com

LD 14
Page 204 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
CMFS CMFS trunk register signaling means that the CIS MF
Shuttle protocol is supported by the trunk.
CMFS may be defined only for trunks on CDTI2/CSDTI2
with “CISFW=MFS” and only if both the MFS and CIST
Packages are equipped.
553-3001-311 Standard 6.00 June 1999
cismfs-23
(CND) Calling party Denied mfc-21
CNA Calling party Allowed
Allowed for L1 Multifrequency Compelled Signaling and
R2 MFC trunks. Automatic Number Identification is denied
for an Outgoing Loop Start (LOP) Central Office Trunk
(COT).
Must have Commonwealth of Independent States (CIST)
package 221 or Multifrequency Compelled Signaling
(MFC) package 128.
(CORX) Central Office Ringback not provided by SL-1 supp-14
CORP Central Office Ringback provided by SL-1
(DIP) Dial Pulse basic-21
DPDT Dial Pulse Digitone (incoming dial pulse - outgoing
digitone)
basic-24
DTDP Digitone Dial Pulse (incoming digitone - outgoing dial
pulse)
basic-24
DIPF DIPF trunk register signaling requires that DP digit
collection be performed by firmware. Applies to CDTI2
or CSDTI2.
DTN Digitone
MFC R2 Multifrequency Compelled Signaling. With Release 21,
MFC can be configured on 1.5 DTI routes.
MFE Multifrequency Signaling for Socotel
MFK Multifrequency Signaling for KD3 basic-20
MFR Multifrequency Receiver for Feature Group D
MFX Mixed Signaling (MFC/DTMF)
(DRPD) DTR PAD value Denied dti2-10
DRPA DTR PAD value Allowed
Can only be configured for 2.0 Mb/s DID with DTI2
enabled.