Software Input/Output Guide X11 Administration ... - paulmick.com

LD 16
Page 398 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
CCBS Call Completion to Busy Subscriber for QSIG and
EuroISDN BRI interfaces. CCBS is allowed if QSIG
supplementary services package 316 is equipped.
CCNI Call Completion on no response using integer value for
operation coding
553-3001-311 Standard 6.00 June 1999
CCNO/CCNI are mutually exclusive.
CCNO Call Completion on no response using object identifier
for operation coding
CCNO/CCNI are mutually exclusive.
CCNR Call Completion to No Reply for QSIG and EuroISDN
BRI interfaces. CCNR is allowed if QSIG
supplementary services package 316 is equipped.
COLP Connected Number IE Presentation is supported on far
end. COLP is supported on Indonesian interfaces, not
as a default because it can be configured.
Default value for ESIG, ISIG, NI2 and EUROISDN
interfaces except for AUS, EIR, DUT, BEL and FRA
interfaces.
CTI Call Transfer Integer
CTI and CTO are mutually exclusive.
CTO Call Transfer Object
CTI and CTO are mutually exclusive.
XCOLP Remove COLP
Default value for all APAC, AUS, EIR, DUT, BEL and
FRA interfaces.
This prompt is issued only for UIPE-based protocols.
CPK Network Call Park.CPK is allowed if IFC = SL1 and
CPRKNET package 306 is equipped.
QSIG SS Call Diversion Notification remote capability.
Configure sending of QSIG Diversion Notification
Information, treatment of Rerouting request and coding
of operations. If coded as Object Identifier, the remote
capability ends with ‘O”, whereas for Integer Value, the
remote capability ends with ‘I’. Only one remote
capability is allowed.
qsig ss-24
qsig ss-24
basic- 23
qsig ss-24
qsig ss-24
qsig ss- 23