Software Input/Output Guide X11 Administration ... - paulmick.com

LD 17
Alphabetical list of prompts Page 467 of 1050
Prompt Response Comment Pack/Rel
Valid inputs:
• x = 0-4
• aaa = NIL for ACB cables or passive Bus
Extender on CPU shelf 1
• aaa = SBE for Segmented Bus Extender on
CPU shelf 1 cabled to Network shelf 3PE or
Network shelf backplane connectors ACB.
• bbb = NIL if Network shelf not equipped.
• bbb = 3PE for 3 Port Extender on a Network
shelf cabled to a SBE on CPU shelf 1, or
cabled to CPU shelf 1 backplane connectors
ACB.
EXT1 is not prompted for Options 11, 21, ST, 21E, or
STE.
E_FILTER NEW Add an Exception Filter entry. alarm-19
CHG Change an Exception Filter entry.
OUT Remove an Exception Filter entry.
This is reprompted for subsequent exception filters.
Up to 50 Exception Filters can be configured.
Entering completes exception filter entries.
Precede with X to remove.
FCDR Format for Call Detail Recording fcdr-20
(OLD) Use OLD for Pre-Release 18 CDR format.
Information field location varies according to which
features are equipped.
NEW Use NEW for Release 18 and later CDR format.
Information field locations are fixed.
Prompted when New Format CDR (FCDR) package
234 is equipped.
FLOW (NO) YES Flow control capability (X11 Release 18 and later)
This prompt appears for Options: 51C,61C,81C.
For Option 11C, FLOW is not prompted when
TTY_TYPE = LSL.
csl-7
(NONE) XON CTS
Flow control (X11 Release 17 and earlier)
Prompted for asynchronous ESDI ports.
X11 Administration