Software Input/Output Guide X11 Administration ... - paulmick.com

LD 11
Page 154 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
xx HOT L bbb xxxx (ccc or D) hot-10
Two-way list entry for Enhanced Hotline key
Where:
• bbb = List entry = 0-999
• xxxx = Two-way Hotline DN. This DN can be up to
4 digits, up to 7 digits with Directory Number
Expansion (DNXP) package 150.
• ccc = CLID entry of (0)-N, where N = the value
entered at the SIZE prompt in LD 15 minus 1.
• D = the character D may be entered to search a
CLID entry from key 0 and up to find a DN key.
The CLID associated with the found DN key will
then be used.
Hotline list entry is defined in LD 18.
Note that the Hotline list NCOS overrides set NCOS.
xx ICF nn xxxx icf-19
Internal Call Forward key
Where: nn = Forward DN length. Prior to release 22,
valid entries are: 4, 8, 12, (16), 20 and 23. Other ICF DN
entries between 4 and 23 are rounded up to the next
valid number. For Release 22 and later, valid entries are
any integer in the range of (4)-31.
Where: xxxx = Forward DN (this entry is optional)
An ICF key can be configured if Call Forward is enabled.
KY1 aaa Key 1 located far left, below dial pad.
Where: aaa = VUP (Volume Up) by default for KY1. Any
function not requiring a lamp may be assigned.
CLS must be LVXA.
KY2 aaa Key 2 located middle, below dial pad.
Where: aaa = VDN (Volume Down) by default for KY2.
Any function not requiring a lamp may be assigned. CLS
must be LVXA.
553-3001-311 Standard 6.00 June 1999