Software Input/Output Guide X11 Administration ... - paulmick.com

LD 56
Page 734 of 1050 Firmware Cadence Table (FCAD)
In order to have the same cadences on 500/2500/digital telephones and SL-1
telephones, the MCAD and FCAD entries 0-15 are identical. Changes to
MCAD entries 1-15 automatically change FCAD entries 1-15. The FCAD
entries 1-15 can only be changed by changing the MCAD entries 1-15.
The Conference/TDS/MFS card must be disabled and then re-enabled to
download changed firmware cadences.
Examples of creating firmware cadences:
1 For a cadence of 2 s on, 4 s off, repeat:
REQ NEW, CHG, PRT
TYPE FCAD
WCAD 1-255
CDNC 0410 0820
END REPT
CYCS 1 (on/off cycles to be repeated)
WTON NO (use default tone for this cadence)
2 For a cadence of 2 s on, 4 s off, 3 s on, 5 s off, repeat:
REQ NEW, CHG, PRT
TYPE FCAD
WCAD 1-255
CDNC 0410 0820 0614 0998
END REPT
CYCS 1 2 (on/off cycles to be repeated)
WTON NO (use default tone for this cadence)
3 For a cadence of:
0.1 s on at 950 Hz, 19 dB below overload A-law, 0.1 off
0.1 s on at 1400 Hz, 20 dB below overload A-law, 0.1 off
0.1 s on at 1800 Hz, 20 dB below overload A-law, steady off
REQ NEW, CHG, PRT
TYPE FCAD
WCAD 1-255
CDNC 0020 0020 0020 0020 0020
553-3001-311 Standard 6.00 June 1999