Software Input/Output Guide X11 Administration ... - paulmick.com

LD 56
Alphabetical list of prompts Page 765 of 1050
Prompt Response Comment Pack/Rel
INTU Intrusion tone
This cadence repeats the last 8 on/off phases to allow
for a special tone burst on the first cycle.
For example, a cadence is defined as 3 s on, 3 s off, 1 s
on, 3 s off. After the initial burst, the tone repeats in a 1 s
on, 3 s off pattern.
In order to repeat the initial 3 s burst, it must be entered
as the first and last cycle because the first cycle is not
repeated. In this case the cadence is defined as: 3 s on,
3 s off, 1 s on, 3 s off, 3 s on 3 s off.
ftc-13
LDN Listed Directory Number tone ftc-13
LIMT Log In Mode Tone for 500/2500 ACD sets
This is the tone setting for ACD services to 500/2500
agent sets. You must have Flexible Tones and
Cadences (FTC) supported for this feature to function
properly.
bacd-16
MINT (NO) YES Allow tones or announcements mint-15
(NO- tone default values)
MWAN 0-255 0-255 ftc-15
Message Waiting
The first parameter is the MCAD table cadence entry
number. The second parameter is the XCT tone code.
MWDT Message Waiting Dial Tone ftc-13
NBCS Normal BCS (SL-1 set) ringing ftc-13
NCAD (1)-255 Normal Cadence
500/2500 and Digital set ringing MCAD cadence
number. (Notes 1 and 3)
It is recommended that the cadence used matches the
cadence provided for SL-1 sets (prompt NBCS). NCAD
is also used for SL-1 sets in systems with XCT
(NT8D17 Conference/TDS) cards.
ftc-13
NDR1 BCS Network Distinctive Ring 1 for BCS (SL-1) sets ftc-16
X11 Administration