Software Input/Output Guide X11 Administration ... - paulmick.com

LD 15
Page 290 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
GPXX x Unsolicited status events 1, 2, 3, 4, 5 or 6
Unsolicited status events are used with Meridian Link
applications. Enter the message to be sent to the host
computer for telephones in the group, where:
• 0 = No status messages monitored
• 1 = On-Hook
• 2 = Off-Hook
• 3 = Ringing
• 4 = Active
• 5 = Disconnect
• 6 = Unringing (Release 19 and later)
Precede the value with an X to remove a status from the
Group report.
553-3001-311 Standard 6.00 June 1999
The prompts GP02 through GP15 appear when
Meridian Link package is equipped. Default values are
in Group 0 and Group 1:
• Group 0 = sends no messages
• Group 1 = sends all messages
Groups 0 and 1 cannot be entered or changed here, but
can be entered in response to the IAPG prompt in LD 10
and LD 11.
GP02 n n n n n Group 2 status events
The following comment applies to prompts GP03
through GP15:
Unsolicited status events are used with Meridian Link
applications. Enter the message to be sent to the host
computer for telephones in the group, where:
• 0 = No status messages monitored
• 1 = On-Hook
• 2 = Off-Hook
• 3 = Ringing
• 4 = Active
• 5 = Disconnect
• 6 = Unringing (Release 19 and later)
Precede the value with an X to remove a status from the
Group report.
mlm-19
iap3p-13