Software Input/Output Guide X11 Administration ... - paulmick.com

LD 16
Page 404 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
RURC x y Route Unit Reference Cost
Formula for Route Unit reference Cost is: X * 10 (-Y)
Where:
• x = 0 - 9999
• y = (0) - 3
This gives a range from.001 to 9999.
Call Charge scenarios:
1. When call charge in sent in currency:
Displayed charge = (Received charge/RURC) *
RUCS
2. When call charge in sent in AOC units:
Diplayed charge = (Received charge * RUCF) *
RUCS units
The default value for x is identical to the previously
entered RUCS value. Not prompted for Danish and
Swedish EuroISDN.
RVSD ic dc Reversed wired CO trunk threshold. Where:
• ic = increment count = 1-(8)-31
• dc = decrement count = 1-(31)
RVSD specifies the percentage threshold for CO trunks
which have tip and ring or other trunk wiring problems.
See prompt ILLR for a description of ic and dc values.
Prompted for COT, FEX and WATS trunks.
553-3001-311 Standard 6.00 June 1999
basic-20
basic-16
SAT (NO) YES Satellite used for trunk route via earth orbiting satellite esn-1
This prompt has no relation to the trunk route function
connecting a main PBX to a satellite PBX.
SBN (NO) Do not send Billing Number on this route basic-21
YES Send Billing Number on this route
SCDT (NO) YES Secondary Dial Tone detection dtd-10