Software Input/Output Guide X11 Administration ... - paulmick.com

LD 15
Page 318 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
PKND (1)-3 Number of digits Dialed for Group Pickup dcp-12
(1)-4 Release 14 and later. Prompted with Directed Call
Pickup (DCP) package 115.
To determine the number of digits, count the number
of digits of the highest number RNPG group.
PNI 1-32700 Private Network Identifier
Each customer data block must have a unique PNI
when multi-customer option is equipped. The PNI in the
CDB functions as a logical customer number for routing
incoming non-call-associated Transaction Capability
Application Part (TCAP) facility messages to the
appropriate ESN translations.
PNI = 1 is typical for customer 0. It must be matched by
the PNI in the far end RDB. Default PNI = 0 prevents the
operation of features such as NRAG, NACD and NMS.
Within one network, use the same value for PNI in both
LD 15 and LD 16. When inter-working with different
networks, the LD 15 PNI is for the local system and the
LD 16 PNI is for the target or remote switch.
PORT 0-15 CDR port cdr-1
Stop PORT prompt
To remove a CDR port, change CDR = NO. Exit and
re-enter LD 15, select CDR = YES, then add only the
desired CDR port numbers. Precede with X to remove.
PORT (0)-15 Serial Data Interface Port Monitor
One Serial Data Interface Port Monitor per customer is
recommended.
PPMD (YES) NO Periodic Pulse Metering mr-10
Prompted with Message Registration (MR)
package 101.
PPM_DATA (NO) YES Change Periodic Pulse Metering options basic-21
553-3001-311 Standard 6.00 June 1999