Software Input/Output Guide X11 Administration ... - paulmick.com

LD 17
Alphabetical list of prompts Page 479 of 1050
Prompt Response Comment Pack/Rel
MPED (SD) Single (Maximum Peripheral Equipment Density) basic-7
DD Double (Maximum Peripheral Equipment Density)
4D Quadruple (Maximum Peripheral Equipment
Density)
8D Octal (Maximum Peripheral Equipment Density)
Set to 8D for superloops. See LD 97. For Option 11,
MPED = 8D in the default data and must remain at
this value for the peripherals to work.
MQC_FEAT
MCDN QSIG Feature type
Prompted if RCAP = MQC
Precede MQC Feature type with X to remove
NAS MCDN NAS functionalities are supported over QSIG
NACD MCDN NACD functionalities are supported over
QSIG
NMS MCDN NMS - MC functionalities are supported over
QSIG
MSCL 0-8190 Maximum number of Speed Call Lists that can be
defined on the system for Release 13 and later.
0-7999 Maximum number of Speed Call lists and/or Group
Hunt lists that can be defined per system.
The system will default to 255 if converted from a
prior release, and the Speed Call package is
equipped. Otherwise, the default is 0.
meet-24
optf-13
MSDT 0-159 Main Synchronization DTSL. supp-16
Enter number of DTSL used for main
synchronization. Prompted if SYNM = 1, 2 or 4.
MTRO (MR) Message Registration mr-20
PPM Periodic Pulse Metering
MTYP Memory Type, indicated in k-words, except when
designated by M for mega-words. Duplicate module
for CPU1 is assumed for each entry.
0 See prompt MEM
128 Module 0 is 128K card for all machine types except
NT, RT, and XT; System Options 51, 61, and 71.
basic-19
X11 Administration