Software Input/Output Guide X11 Administration ... - paulmick.com

LD 15
Page 288 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
FLSH xxx Switchhook Flash timing. (format when International
Supplementary Features (SUPP) package 131 is not
equipped)
xxx yyy Minimum and maximum switchhook flash time in
milliseconds (format when International Supplementary
Features (SUPP) package 131 is equipped)
553-3001-311 Standard 6.00 June 1999
Where: xxx = 20-(45)-768; yyy = xxx-(896)-1500
The timing specified will be used for EPE equipment
only. XPE equipment will use the FLSH specified in
LD 97.
basic-1
FMOP (NO) Flexible Misoperation options are not required mpo-20
YES Flexible Misoperation options are required
FNAD Call Forward No Answer treatment for DID calls basic-2
(HNT) Hunt DN, defined in telephone data block
ATT CFNA to attendant
FDN Flexible CFNA DN, defined in telephone data block
NO CFNA not allowed
FNAL Call Forward No Answer treatment for all other calls
including trunk calls marked as internal.
An internal trunk call is a trunk call in which LD 16
prompt RCLS = INT. If FNAL = HNT, no answer calls
are forwarded to the Hunt DN.
(HNT) Hunt DN (defined in telephone data block)
ATT CFNA to attendant
FDN Flexible CFNA DN (defined in telephone data block)
NO CFNA not allowed
FNAN Call Forward No Answer treatment for DID calls.
FNAN is prompted only in X11 Release 9 and earlier.
(HNT) Hunt DN, defined in telephone data block
ATT CFNA to attendant
FDN Flexible CFNA DN, defined in telephone data block
NO CFNA not allowed
basic-10
basic-2