Software Input/Output Guide X11 Administration ... - paulmick.com

LD 16
Page 414 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
MAD 0-(500)-1000 xujt-16
Minimum Answer Delay timer
The minimum amount of time the Meridian 1 remains
On-Hook after the called party is first alerted. Inputs are
in steps of 100 ms, numbers are rounded up to next
valid entry. Allowed only if Japan trunks and Meridian 1
packages are equipped.
MFC 128-(12032)-65408 mfc-9
Multifrequency Compelled Signaling (MFC) timer
MFE 128-(14976)-65408 mfe-10
MFC Interdigit timer
MFID (0) - 25088 basic-23
R2MFC Interworking timer.
This timer will be in the range of 0 - 25 seconds, in
128ms increments. A value of 0 will indicate that the
timer is disabled and existing timing functionality will be
used.
MFK 128-(4992)-32640 kd3-20
First backward signal awaiting timer
MFKM 45- (90)-180 kd3-20
Timer value in seconds representing the total amount of
time the signal exchange equipment can be occupied in
a call expressed in seconds.
MFO (0)-16256
MFC Transmit timer
If 0, then use current value of MFC Timer.
MFR128-(2048)-16256 kd3-20
MFC Reception timer
MFX128-(4096)-16256 kd3-20
MFC Transmission timer
NBL 128-(4096)-32640 basic-12
Enblock Long dialing timer
Long timeout period set to check if all digits have been
entered.
553-3001-311 Standard 6.00 June 1999