Software Input/Output Guide X11 Administration ... - paulmick.com

LD 15
Alphabetical list of prompts Page 319 of 1050
Prompt Response Comment Pack/Rel
PREF 0-9999 Up to 4 digit Access Prefix for a unique NPI/TON
combination in the table.
# Wild character for replacement of any digit. The entry of
# for wild card character will be stored as *.
X Reset the access prefix value to nil
isdn-24
PREO Pretranslation Option pxlt-8
(0) Disabled
1 Enabled
To enable the Pretranslation feature, the Pretranslation
data block or Calling Group to Speed Call correlation
must be configured in LD 18.
Prompted with Pretranslation (PXLT) package 92.
PRMT aaa aaa = sequence of any alphanumeric character. max of
126 characters.
Subsequent Non Specified Information parameters for
Message Waiting notification.
‘PRMT” is re-prompted until is entered, then the
next prompt ‘CANC’ is prompted.
PSTN (NO) YES Public Service Telephone Networks
Limit the number of PSTNs allowed in a network
connection to one PSTN. The default (NO) puts no limit
on the number of PSTN connections.
dmwi- 23
isdn-14
PTTY (0)-15 PPM TTY number for printing meters (one per switch) mlwu-16
Precede with X to remove.
Prompted with Multi Language Wake Up (MLWU)
package 206. TTY must be defined with USER = BGD
in LD 17.
PWD_DATA (NO) YES Customer related passwords basic-21
PWD2 x...x Second level administration Password
Password length is 4-16 characters and is defined in
LD 17. The SPWD password is not updated unless the
PWD2 password is entered correctly. PWD2 must be
entered before new ATAC is accepted.
basic-1
R2BN 0-23 0-59 RAN2 Begin time awu-10
X11 Administration