Software Input/Output Guide X11 Administration ... - paulmick.com

LD 15
Alphabetical list of prompts Page 301 of 1050
Prompt Response Comment Pack/Rel
LSC 1-9999999 cdp-12
Local Steering Code. For Release 22, LSC can be one
to seven digits.
LSCs are required if the CDP DNs are longer than the
local PDNs. The CLID sent for a CDP call is composed
of the LSC defined in LD 15 plus the PDN of the calling
set.
Various ISDN network features depend on the CLID
as the return address for sending feature control
messages. Multiple LSCs may be defined in LD 87
for CDP but only one LSC can be defined here for
the CLID.
The LSC prompt appears only if the user has a five or
six digit dialing plan, or if the DPNSS software package
is equipped. LSC is prompted here if ISDN = NO,
otherwise LSC is a sub-prompt of ISDN.
Precede with X to remove
MAIN (NO) YES CAS Main casm-1
MATT (NO) YES Consoles used as Message Center mwc-1
Prompted with Message Waiting Center (MWC)
package 46 and OPT = MCI.
MAXT 1-255 Maximum number of NFCR translation tables
Once defined a lower value cannot be entered for
MAXT. The sum of the values for MAXT and DCMX
cannot exceed 255 or MAXT + DCMX ð 255 per
customer.
MBG (0)-65535 Multi-location Business Group. Where:
• 0 = no indication
• 1 = reserved for public network
• 2-65535 = Business Group Identifiers
This parameter is used to define the Multi-location
Business Group. It is not currently used by the MSL-1,
but is added for interfacing with systems that require it.
nfcr-2
tens-16
MBNR (OVF OVF OVF ATN) basic-1
Maintenance Busy Numbers
X11 Administration