Software Input/Output Guide X11 Administration ... - paulmick.com

LD 10
Alphabetical list of prompts Page 85 of 1050
Prompt Response Comment Pack/Rel
DIG 0-253 0-99 di-1
Dial Intercom Group (DIG) number and Dial Intercom
Member (DIM) number prior to Release 14.
0-2045 0-99
Dial Intercom Group (DIG) number and Dial Intercom
Member (DIM) numbers for Release 14 and later.
The value entered for the member number cannot be
equal to the SPRE code. In the case of double-digit
values, the first digit cannot be the same as the SPRE
code. For example, if SPRE = 1, the member number
cannot be 10, 11...19.
Single line telephones assigned as Dial Intercom sets can
only make calls within their own dial intercom groups. No
DN can be assigned to them.
If any member in the group has a two digit member
number, all members have a two digit number. The
system enters leading zeros.
Must have maximum number of Dial Intercom Groups
(DGRP) defined in LD 15.
DISPLAY_FMT Display Format for CPND name cpnd-19
(FIRST, LAST)
May be input as FIRST
To view names as John Doe
LAST, FIRST
May be input as Last
To view names as Doe John
DN x...x yyy Directory Number (x...x) and CLID entry (yyy)
The DN can be up to 4 digits, up to 7 digits with Directory
Number Expansion (DNXP) package 150. DN is not
prompted for Option 11 model sets or if DIG is defined.
Range for CLID entry is: [(0) - (value entered for SIZE
prompt in LD 15 minus 1)]
basic-1
X11 Administration