Software Input/Output Guide X11 Administration ... - paulmick.com

LD 17
Page 464 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
DTIC 0, 4, 8,…156 Starting network loop slot for PRI/DTI card
In Option 21 systems, each network slot has one
superloop, made up of four loops. Since the DTI/PRI
card takes two slots, eight loops are used per
DTI/PRI.
On non-Network loops, enter return and ignore
the SCH2035 message. Do not input loop numbers
that take the system out of its bounds. Number must
be even for all systems.
Not prompted for Option 11.
DTOB (4)-100 Digital Trunk Output Buffers per Digital Trunk
Signaling Link
Required for IDA trunks. Prompted with Integrated
Digital Access (IDA) package 122. Used with
NT5K75AA DCHI operating in mode 0 or 1.
DTRB Digitone Burst time in ms
(100) 100 ms bursts of DTMF with 100 ms interdigit pause
50 50 ms bursts of DTMF with 50 ms interdigit pause
60 60 ms bursts of DTMF with 90 ms interdigit pause
70 70 ms bursts of DTMF with 70 ms interdigit pause
This determines the DTMF burst and interdigit pause
for the Tone and Digit Switch or TDS.
Burst time of 50 ms is used for the Fast TDS; 100 ms
is used for the standard TDS. Burst time of 60 ms
and 70 ms is used for international requirements.
553-3001-311 Standard 6.00 June 1999
di-5
dass2-16
DUPX (FULL) Full Duplex mode csl-7
Enter FULL if each end can simultaneously send and
receive.
HALF Half Duplex mode