Software Input/Output Guide X11 Administration ... - paulmick.com

LD 17
Page 504 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
TERD Double Density Terminal equipment loop or loops phtn-20
0, 1, 2, ...159 Meridian 1 loop or loops
G0,G1...G159 GEC loop or loops
N0,N1,...N159 Precede loop number with N to create a phantom
loop for third party applications
T0, T1...T159 TVT loop or loops
X0,X1,...X159 Precede loop number with X to remove.
If entry is for an odd numbered loop, the preceding
even numbered loop cannot be TDS, CONF or
MFSD.
TERM Single Density Terminal equipment loop or loops phtn-20
0, 1, 2, ...159 Meridian 1 loop or loops
G0,G1...G159 GEC loop or loops
N0,N1,...N159 Precede loop number with N to create a phantom
loop for third party applications
T0, T1...T159 TVT loop or loops
X0,X1,...X159 Precede loop number with X to remove. If entry is
for an odd-numbered loop, the preceding even
numbered loop cannot be TDS, CONF or MFSD
TERQ Quadruple Density Terminal equipment loop or loops phtn-20
0, 1, 2, ...159 Meridian 1 loop or loops
G0,G1...G159 GEC loop or loops
N0,N1,...N159 Precede loop number with N to create a phantom
loop for third party applications
T0, T1...T159 TVT loop or loops
X0,X1,...X159 Precede loop number with X to remove.
TIMR (NO) YES Change protocol timer value basic-1
TMDI (YES)
NO
TITE
(0)
2
553-3001-311 Standard 6.00 June 1999
TMDI Card (Mode set to PRI OR TRK) Option 11C
Other Card
T1 transmit Equalization
0 - 200 feet
200 - 400 feet
basic-24
basic-24
TMRK 96, (128) Length of cadence increments in ms basic-13
Refer to the Flexible Tone and Digit Switch cards
NTP. See CLN prompt in LD 56.