Software Input/Output Guide X11 Administration ... - paulmick.com

LD 16
Alphabetical list of prompts Page 379 of 1050
Prompt Response Comment Pack/Rel
LEC 0 - 9999999 Local Exchange Code
LEC is used for building ANI messages. LEC is
prompted if:
1. Commonwealth of Independent States (CIST)
package 221 is equipped
2. ICOG = OGT
3. TKTP = COT (for analog trunks, TKTP
must = DID)
4. DGTP = DTI2
May be from 0 up to the ANSZ length.
Prompted for outgoing CIS route.
Used for building ANI message if ANIC is NO or if
ANIC=YES but the ANI entry associated with the
originator of the call is not configured.
cist-21
LGTH 4-(60)- 7200 Maximum message length in seconds. For fault
detection purpose. Applicable to MPUL, MLVL & MCON
RAN machine types.
LID (0)-2 Line Identities option. Where:
• 0 = do not send ISDN Line Identities
• 1 = send ISDN Line Identities
• 2 = convert and send ISDN Line Identities
Prompted with Integrated Digital Access (IDA) package
122 and SIGL = DAS
ranbrd- 23
ran- 23
dass2-16
LMNL 0-15 Loss deviation Maintenance Limit (in dB) atm-7
LOCD (6) 7 Number of digits used in a local call by the far end
Central Office
mfc-9
LOUT 0-15 Loss Out-of-Service deviation limit (in dB) atm-7
MANO (NO) YES Manual Outgoing trunk route basic-1
Define the manual DN in LD 14 at prompt MNDN.
MAX 1-254 Maximum number of channels allowed on the ISA
route, service dependent.
1-510 With Release 24
isa-12
X11 Administration