Software Input/Output Guide X11 Administration ... - paulmick.com

LD 17
Page 492 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
PR_TRIGS
DIV xx y
CNG xx y
CON xx y
553-3001-311 Standard 6.00 June 1999
Path Replacement Triggers are set to their default
values:
DIV 2 3
CNG 2 3
XCON 2 3
2 Path Replacement attempts with a delay of 3
minutes for Diversion and Congestion triggers but
Connected number is not a trigger.
Diversion is used to trigger Path Replacement.
Congestion is used to trigger Path Replacement.
A Connected number different from a called number
is used to trigger Path Replacement.
Precede with X to remove.
xx = 0 - 15, the number of Path Replacement
attempts.
y = 1 - 7, the delay between two Path Replacement
attempts in minutes.
PRTY xx xx xx Priority overlay programs to be stored in cache
memory
Priority overlays stay in cache memory when a new
overlay is loaded. Enter one or more commonly used
overlay program numbers. Priority can be set only
for the number of overlays specified in the CACH. xx
= the overlay number.
Precede with X to remove an overlay program
number.
qsig ss-23
basic-18
PTMR (0)-31 Polling Timer for PMSI pms-19
This is the polling timer, in minutes. When
PTMR = 0, polling does not occur.
PWD (NO) YES Change Password options basic -19