Software Input/Output Guide X11 Administration ... - paulmick.com

LD 15
Page 242 of 1050 Data Block: FTR (Features and options)
TFDR (NO) YES Trunk Failure Display Required
RPA (NO) YES Radio Paging Allowed
MCDC (NO) YES Malicious Call DN/CLID printing allowed
NAUT (NO) YES Network Authorization Code
IDEF (NO) YES Internal/external definition
MTAR (NO) YES Meridian Mail Trunk Access Restriction
LEND (NO) YES List Entry Number Delimiter
MSCD (NO) YES Mandatory Speed Call Delimiter
CPCI (NO) YES Called Party Control on Internal Call (is not) is allowed for the
customer
CONF_DSP (NO) YES Change Conference Display configurations
- CNFFIELD (NO) YES Enable Conference Count Display Field
- -CNF_NAME (CONF) aaaa Change Conferees Count Display Field Name
- INTFIELD (NO) YES Enable Internal Conferees Count display field
- -INT_NAME (I) aaaa Change Internal Conferees Count display field
- EXTFIELD (NO) YES Enable Total External Conferees Count display field
- -EXT_NAME (E) aaaa Change Total External Conferees Count field name
DAPC (NO) YES Dial Access Prefix on CLID table entry option
- TBL 1-15 Table Number
- NPI aaa Numbering Plan
- - TON aaaa Type of Number
- - - PREF 0-9999 Access Prefix for a unique NPI/TON combination in the table.
BSFE (NO) YES Boss Secretary Filtering Enhancement
- ACT_IDLE aaaa Lamp status when boss’s set has BSFE active and is idle,
where aaaa = (WINK), FLSH, LIT or DARK
- ACT_BUSY aaaa Lamp status when boss’s set has BSFE active and is idle,
where aaaa = (FLSH), WINK, LIT or DARK
- DACT_IDLE aaaa Lamp status when boss’s set doesn’t have BSFE active and is
idle, where aaaa = (DARK), WINK, LIT or FLASH
- DACT_BUSY aaaa Lamp status when boss’s set doesn’t have BSFE active and is
busy, where aaaa = (LIT), WINK, FLASH or DARK
ARDL_ATTEMPT
1-(30)-60 Automatic Redial number of attempts
ASPCT (10)-180 Analog Semi-Permanent Connection re-connection Timer
553-3001-311 Standard 6.00 June 1999