Software Input/Output Guide X11 Administration ... - paulmick.com

LD 16
Alphabetical list of prompts Page 397 of 1050
Prompt Response Comment Pack/Rel
QREC (NO) YES CDR ACD Q initial connection records to be generated cdr-1
R2MD (NO) YES R2 modification mfc-9
RACD (NO) YES Route traffic information in ACD Reports
Enter YES only if the route is used as the Interflow DN
of at least one ACD DN and the Interflow Trunk traffic is
desired.
Prompted for COT, TIE, DID, WAT, and FEX trunk types
only prior to Release 17. Allowed for RAN trunks in
Release 17 and later.
Actual ACD Report format output examples are
included in the ACD Management Reporting NTP.
acd-12
RANR 0-511 RAN Route number for the desired RAN route. ranx-20
RANX RAN for calls diverted to external trunks ranx-20
(NO) RAN not requested when a call is forwarded to this
route.
YES RAN requested when a call is forwarded to this route.
Prompted when:
1. TKTP = COT
2. RPA = NO
3. DSEL = VCE or VOD
4. ICOG = IAO or OGT
RCAL (NO) Deny Manual Service Recall supp-10
ATT Allow Manual Service Recall
DRA DID Recall to Attendant for DTI2 trunks
RCAL is prompted when TKTP = DID or COT
RCAP Remote Capabilities. Precede with X to remove a
configured capability. This prompt will be repeated until
is entered.
BRI ISDN Line/Trunk interworking. Default for all Asia
Pacific interfaces.
CCBI Call Completion to busy subscriber using integer value
for operation coding
CCBO/CCBI are mutually exclusive.
CCBO Call Completion to busy subscriber using object
identifier for operation coding
CCBO/CCBI are mutually exclusive
supp-10
qsig ss-24
qsig ss-24
X11 Administration