Software Input/Output Guide X11 Administration ... - paulmick.com

422
LD 16
LD 16
Issued: June 1999
Status: Standard
X11 Release: 24
LD 16: Route Data Block, Automatic Trunk
Maintenance
Page 333 of 1050
This Overlay program allows data for trunk routes, ATM schedule hours, or
ATM routes to be created or modified.
When the Overlay is loaded the available system memory and disk records
are output in a header as follows:
RDB000
MEM AVAIL: (U/P): xxxxxx USED: xxxxx TOT: xxxxxxx
DISK RECS AVAIL: xxx
RAN RTE AVAIL: (U/P): xxx USED: xxx TOT: xxx
The range for route numbers are release dependent.
— 0-511 for machine types NT, RT, STE, XN, XT and system Options 21E,
51, 51C, 61, 61C, 71, 81, and 81C with Release 14 and later.
— 0-127 for all other machines and system options.
With X11 Release 14 and later, trunk route 31 is no longer reserved for
Private routes. Private routes can be configured individually by the customer
on any available CO trunk route.
After making any changes to the route data block, IPE trunk cards must be
downloaded with ENLC l s c command in LD 32.
With X11 Release 23, the Incremental Software Management header includes
Recorded Announcement Broadcast (RAN RTE) information. This
information is updated each time a new RAN route is configured.
X11 Administration