Software Input/Output Guide X11 Administration ... - paulmick.com

LD 16
Page 420 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
TRMT (NONE), FAIL, TEST, NPA m911-19
Numbering Plan Digit or Information Digit treatment
FAIL = Interrupts the NPD/ID as an ANI failure
TEST = Interrupts the call as a 911 test call (for 922T
calls only)
This prompt appears when the Meridian 911 (M911)
package 224 is equipped.
TRO (NO) YES Trunk Route Optimization tro-16
Prompted if NCRD = YES and IFC = SL-1.
TRRL (NO) Recall signal may be received and transmitted on this
route.
YES Recall signal can be neither received nor transmitted on
this route.
TRRL appears if ACRL package 236 is equipped and
the route is analog TIE.
553-3001-311 Standard 6.00 June 1999
arcl-22
TST n...n Test loop around DN, range is 2 to 10 digits basic-1
TTA (NO) YES Time To Answer output in CDR fcdr-18
TTBL (0)-31 Tone Table number ftc-13
Table (0), North American default values, is created
when the first customer is created. Refer to LD 56
for other tables.
TW_INC_CLID CLID Option on an incoming TWR1 route twr1-24
(NO) YES
TW_ROUTE
(NO) YES Taiwan R1 route twr1-24
TYPE Route type atm-19
ATM Automatic Trunk Maintenance data block.
Requires Automatic Trunk Maintenance (ATM)
package 84.
NPID Numbering Plan or Information Digit table.
Requires Meridian 911 (M911) package 224.
RDB Route Data Block.
SCH ATM Schedule block. Requires Automatic Trunk
Maintenance (ATM) package 84.