Software Input/Output Guide X11 Administration ... - paulmick.com

LD 11
Page 136 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
(XMWD) Extended Message Waiting indication Denied vmba-24
XMWI Extended Message Waiting indication Allowed
(VCE) Voice Terminal basic-5
DTA Data Terminal
553-3001-311 Standard 6.00 June 1999
VCE is used for voice TNs. DTA is used for data. For
digital line cards the Class of Service is VCE for units 0-7
and DTA for units 8-15. For NT8D02 Digital Line Cards,
the Class of Service is VCE for units 0-15 and DTA for
units 16-31.
(VMD) Server Voice Messaging Denied cls-8
VMA Server Voice Messaging Allowed
(WTA) Warning Tone Allowed basic-1
WTD Warning Tone Denied
(XHD) Exclusive Hold Denied dhld-4
XHA Exclusive Hold Allowed
CPND Calling Party Name Display cpnd-19
NEW New CPND entry
OUT Delete CPND entry
CHG Change CPND entry
Must have Calling Party Name Display (CPND)
package 95 and CPND data block defined in LD 95.
CPND_LANG Calling Party Name Display Language cpnd-19
(ROM) Roman
KAT Katakana
CUST xx Customer number associated with this set basic-1
Customer number is defined in LD 15.
DCD Dynamic Carrier Detect arie-14
(ON) Enables Dynamic CD
OFF Carrier Detect starts as inactive and follows the state of
the call. With DAC in Release 16 and later, DCD is only
prompted if TYPE = R232.