Software Input/Output Guide X11 Administration ... - paulmick.com

LD 17
Page 500 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
SECU (NO) YES Security for Meridian Link applications
When set to NO, the host computer must specify
both the TN and DN of the associate set in connect,
answer and release messages.
Prompted when the Integrated Services Digital
Network Application Module Link for Third Party
Vendors (IAP3P) package 153 is equipped for
ISDN/AP Third Party.
SEMT (1)-5 Number of Status Enquiry Messages sent within 128
ms from the network side
553-3001-311 Standard 6.00 June 1999
iap3p-12
msdl-24
SEVERITY Alarm Severity of a particular alarm entry alarm-19
(NONE) No rating (default status)
CRITICAL System operation is in jeopardy
MAJOR Serious condition, the system is operational
MINOR Error condition detected, system operation not
affected
Retains current value
SID xxxx System ID number basic-1
The SID is used for polling an SL-1 for ACD, CDR
and traffic reports. It can also be printed and
changed using LD 2.
SIDE Meridian 1 node type pri-12
(USR) Slave to the controller
NET Network, the controlling switch
Prompted only if IFC = SL-1, ESIG or ISIG. Opposite
sides of the PBX-to-PBX interface must be set as
NET or USR. The call processing software uses
these labels to handle call collision.
SIZE (0)- 65534 Size of History File buffer in characters
The History File stores system messages in
Protected Data or P data and uses an SDI port
address. The History File survives initialization, but
is lost when SYSLOAD occurs or the length of the
file is changed.
The History File cannot be created if all 16 I/O ports
are defined. Prompted if ADAN = HIST or TRF
hist-18