Software Input/Output Guide X11 Administration ... - paulmick.com

LD 16
Alphabetical list of prompts Page 365 of 1050
Prompt Response Comment Pack/Rel
DLTN (NO) YES Dial Tone on originating calls basic-1
Provide dial tone to the far end when the trunk has
been accessed from the far end.
DMOD 1-127 Default Model number for this route (Option 11) basic-16
DNAM (NO) YES Display IDC name dnis-17
Prompted with Calling Party Name Display (CPND)
package 95. Prompted following NDNO if DNIS = YES.
DNIS (NO) YES ACD DNIS route dnis-10
Prompted with Automatic Call Distribution Package D
(ACDD) package 50, and the RTYP = TIE or DID.
DNSZ (0)-7 Number of digits expected on DID routes supp-10
0 indicates no fixed number
DAPC (NO) YES Display of Access Prefix on CLID isdn-24
DPPI (1167) nnnn Privacy indicator for a dial-pulse trunk. cpp-21
Any arbitrary digit (0-9) sequence up to 4 digits may be
entered. If CPP prompt is changed from NO to YES and
is entered, DPPI defaults to 1167.
DPPO (1182) nnnn Privacy Override Indicator for a dial pulse trunk.
nnnn = any arbitrary digit (0-9) sequence up to 4 digits
in length.
DPPO is defaulted to 1182 if CPP is changed from NO
to YES and is entered
cpp-23
DRNG North American Distinctive Ringing for incoming calls drng-8
(NO) For TIE trunks to provide normal ringing (i.e., make/
break/ make/ break, 0.25 sec./ 0.25 sec./ 2.25 sec. to
incoming calls terminating on stations)
YES For CO trunks to provide distinctive ringing (i.e.,
make/break, one second/two seconds to incoming calls
terminating on stations).
Distinctive Ringing only applies to CAM, COT, DID,
FEX, TIE and WAT trunks. These trunks cannot be
configured as outgoing only for prompt ICOG.
X11 Administration