Software Input/Output Guide X11 Administration ... - paulmick.com

LD 16
Page 406 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
SIDE Meridian SL-1 Node Type basic-22
(NET) Network
USR User
553-3001-311 Standard 6.00 June 1999
SIDE defaults to NET if IFC = SL1. SIDE defaults to
USR if IFC = 1TR6, NUME, APAC, EUROISDN or D70.
Prompted if IFC = SL-1.
SIGL Signaling interface for CAMA trunks cama-1
BEL Bell method
NT4 NT400 method
NT5 NT500 method
Layer 3 Signaling
APNS APNSS signaling
DAS DASS2 signaling, allowed with Digital Access Signaling
System 2 (DASS2) package 124
DPN DPNSS signaling, allowed with Digital Private Network
Signaling System 1 (DPNSS) package 123
SIGO Signaling arrangement esn-19
(STD) Standard signaling arrangement
ESN2 Supports NCOS, TCOS and CCBQ call types
ESN3 Supports network call transfer, Satellite Link Control
and all ESN2 call types. It does not support DTI calls.
Either ESN2 or ESN3 is recommended for ISA.
ESN5 Supports DTI data calls plus all other types.
ETN Electronic TIE Network signaling arrangement
EN19 ESN Transparent Data Networking data call. Allowed
when TKTP = TIE for PRI and DTI trunks.
SLCT TONE Select Tone mfc-24
MSG Select Message
SPCT Speech Path Cut-Through basic-1
(IMM) Immediate cut-through
DLY Delayed cut-through
SPN (NO) YES If yes is entered, the SPN’s AC is inserted first to pra-21
search for a valid UDP number.
SPN is prompted when the route type is an IDA trunk
with DPNSS1 signaling and when INAC = YES.