Software Input/Output Guide X11 Administration ... - paulmick.com

LD 17
Page 478 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
MCFN x x x x x x Number and size of SIMMs in options: 51C, 61C,
81C, 81.
Where x = 0, 4, or 16 (for SIMM size in megabytes).
The SIMM size depends on the CP card type.
If size is not specified, the system assumes they are
unequipped (ie. size = 0). This does not affect
system operation.
MCNT 5-100000 Message Count Threshold
Threshold for number of Meridian Link messages
per time interval. The recommended setting is 400.
With INTL = 4 and MCNT = 400, the maximum flow
is 20 messages per second.
553-3001-311 Standard 6.00 June 1999
basic-21
iap3p-12
MEM Memory modules, prompted when MTYP = 0. basic-1
0-6 Add memory modules of 64K words. QPC51 card
Precede with X to remove.
MFSD 0, 2, 4…158 Multifrequency Sender loop. Use even-numbered
loops for Multifrequency Sender.
1-9 Option 11
Precede with X to remove.
MGCR 0-NCR Maximum number of call registers used by AUX
messaging.
MGCR is associated with the NCR prompt. It is
the maximum number of call registers that can be
queued for use by AUX messaging before extra
processing time is allocated to handle them.
MLDN (NO) YES Multiple Loop DN. MLDN allows multiple appearance
DNs to be on different loops.
MODE Mode of operation dti-8
LINK Digital Link mode (Not supported for Option 11)
PRI Primary Rate Interface mode
TRK Digital Trunk mode
basic-1
basic-1
basic-1