05.02.2013 Views

Software Input/Output Guide X11 Administration ... - paulmick.com

Software Input/Output Guide X11 Administration ... - paulmick.com

Software Input/Output Guide X11 Administration ... - paulmick.com

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

LD 16<br />

Alphabetical list of prompts Page 371 of 1050<br />

Prompt Response Comment Pack/Rel<br />

HLCL 0-9999 Home Location Number<br />

This number is similar to PFX2 number prompted in<br />

LD 15. It is added to this overlay so that this prefix can<br />

be configured on a route basis as required in some<br />

countries (e.g., Italy).<br />

As is the case with PFX2, the HLCL prefix can be from<br />

one-to-four digits long. This prompt is displayed only if<br />

CPFXS = NO.<br />

If only a is entered, this prompt keeps its<br />

previous configuration. If no value was configured<br />

previously, no value will be configured.<br />

Enter X to delete the digits.<br />

HNTN 0-9999 Home National Number<br />

This number is similar to the PFX1 number prompted in<br />

LD 15. It is added to this overlay so that this prefix can<br />

be configured on a route basis as required in some<br />

countries (e.g., Italy).<br />

As is the case with PFX1, the HNTN prefix can be from<br />

one-to-four digits long. This prompt is displayed only if<br />

CPFXS = NO.<br />

If only a is entered, this prompt keeps its<br />

previous configuration. If no value was configured<br />

previously, no value will be configured.<br />

Enter X to delete the digits.<br />

HOLD ic dc ht Hold failure threshold. Where:<br />

• ic = increment counter = 1-(2)-31<br />

• dc = decrement count = 1-(2)-31<br />

• ht = minimum hold time = 1-(40)-127 seconds<br />

The failure to hold applies to trunks which are not<br />

properly seized but disconnected sooner than the<br />

minimum hold or ht.<br />

See prompt ILLR for a description of increment count<br />

(ic) and decrement count (dc) values. The default for<br />

AID trunks is 2 1 40.<br />

euroidsn-22<br />

euroidsn-22<br />

basic-1<br />

<strong>X11</strong> <strong>Administration</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!