Software Input/Output Guide X11 Administration ... - paulmick.com

LD 15
Page 286 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
ECDR (NO) YES Print End-to-End Signaling digits in CDR record ees-19
EESD
(NO)
YES
553-3001-311 Standard 6.00 June 1999
End-to-End Signalling Digit Display
No End-to-End Signalling Digit Display
Display End-to-End Signalling Digits
ees-24
EEST End-to-End Signaling Tone to originating party ees-19
(NO) No feedback tone to the originator
YES Send feedback tone to originator
When EEST = NO or when EEST = YES and
DTMF = NO, Improved End-to-End Signaling is used.
When EEST = YES and DTMF = YES, Enhanced
End-to-End Signaling is used.
EEST is prompted with End-to-End Signaling (EES)
package 10.
EFLL (0)-8064 Efficiency Factor Loading Level nas-14
Prompted with Network Attendant Services (NAS)
package 159
ELPL 1-15 Electronic Lock Password Length (number of digits) basic-12
ENS (NO) YES Enhanced Night Service enabled ens-20
Prompted with Enhanced Night Service (ENS)
package 133.
ENTRY xx CLID entry to be configured.
CLID entries must be between 0 and the value entered
at the SIZE prompt - 1. Precede entry or entries with X
to delete. ENTRY is repeated until a is entered.
ESA_APDN (YES) NO Append the originating Directory Number after the
Home Local Number for Emergency Services Access
calls.
ESA_HLCL x..x Home Local Number for Emergency Services Access
calls.
If the system is Flexible Numbering Plan (FNP)
packaged, then up to 12 digits are accepted.
If the system is not FNP packaged, then up to 7 digits
are accepted.
‘X’ deletes the data.
isdn-22
esa- 23
esa_clmp
-23
esa- 23