Software Input/Output Guide X11 Administration ... - paulmick.com

LD 16
Alphabetical list of prompts Page 395 of 1050
Prompt Response Comment Pack/Rel
PR_RTN (NO) YES Path Replacement Retain Option is supported by the
far end Private Integrated Services Network Exchange.
PR_TRIGS
DIV xx y
CNG xx y
CON xx y
Path Replacement Triggers are set to their default
values:
DIV 2 3
CNG 2 3
XCON 2 3
2 Path Replacement attempts with a delay of 3 minutes
for Diversion and Congestion triggers but Connected
number is not a trigger.
Diversion is used to trigger Path Replacement.
Congestion is used to trigger Path Replacement.
A Connected number different from a called number is
used to trigger Path Replacement.
xx = 0 - 15, the number of Path Replacement attempts.
y = 1 - 7, the delay between two Path Replacement
attempts in minutes.
Precede with X to remove.
qsig ss- 23
qsig ss-23
PSDS (NO) YES Public Switched Data Service basic-18
Prompted if TKTP = MCU.
PSEL (DMDM) DM-DM Protocol Selection basic-18
TLNK T-link Protocol Selection
TLNK protocol is used by SL-100 and DMS data
devices, DM-DM is used by Meridian 1 data devices
such as ASIM, AIM, ADM, SADM, Asynch Data Option
or ADO, and MPDA. MCA uses both protocols. PSEL is
prompted if TKTP = R232, R422, or MCU.
PTUT 0-510 Preference Trunk Usage Threshold mfc-24
X11 Administration