Software Input/Output Guide X11 Administration ... - paulmick.com

LD 17
Alphabetical list of prompts Page 499 of 1050
Prompt Response Comment Pack/Rel
ROLR (0)-63 Receive Objective Loudness Rating
The default is 0, indicating no change to the default
+45 dB. The number entered in this field
corresponds to an offset value. The offsets and their
corresponding values are provided on page 443.
The ROLR value is downloaded to Meridian Modular
telephones after sysload except when performing
parallel reload. Refer to the Summary of
Transmission Parameters NTP and the International
Loss and Level Plan planning and engineering NTP
before changing these values. Not prompted when
United Kingdom (UK) package 190 is equipped.
RPEB 16-1000 Remote Peripheral Equipment Buffers,
2.0 Mb/s RPE
RXMT 1-(5)-20 Retransmission Threshold
Enter in units of 5 per cent. RXMT is the % of
retransmissions allowed in 15 minutes before out of
service is enforced, or:
RXMT = (# of packets retransmitted) ÷ (total #
packets sent).
SATN l s c u TN of SADM/Data Line Card associated with IND
CSL. For SL-1 telephone with CLS = CMSA.
SBA_ADM_INS Maximum Administrator and/or Installer Log Ins
allowed at one time.
0-(1)-2 For Option 11E
0-(2)-64 For Options 21-71 and 81
arie-14
rpe-15
basic-1
cls-7
adminset-21
SBA_USER Maximum User Log Ins allowed at one time. adminset-21
0-(10)-20 For Option 11E
0-(50)-250 For Options 21-71
0-(100)-500 For Option 81
SBE (NO) YES Segmented Bus Extender is equipped on SL-1MS,
SL-1S
basic-1
X11 Administration